one. machine operation
1. The machine recognizes that this model is suitable for the production of plain weave and terry socks. Each row and main mouth can be made into six colors. Generally, the output of normal socks can be 150 pairs per shift per machine. With various styles such as heels, the suction device is adopted, and the end of each sock automatically falls off.
Automatic oil supply, with socks counting and control functions, can display the output of each shift. The machine has a total of six ports. Viewed from the front of the machine, from left to right, it is divided into the first port, the second port, the third port, the fourth port, the fifth port, and the sixth port is also called the main port. There are 8 shuttles in the main port, called No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 7, No. 8 shuttles from right to left, and there are 3 shuttles in each of the other auxiliary ports, from the left Called No. 1, No. 2 and No. 3 to the right, the No. 1 and No. 2 shuttles at the main port generally wear cotton yarn, which is often used to make socks and veils. The No. 5 shuttle usually wears cotton yarn for the head and veil, the No. 6 shuttle generally wears spandex for the bottom yarn of socks, and the No. 7 and No. 8 shuttle usually wears nylon or spandex for the bottom thread.
2. There are three buttons on the right side of the operation panel to operate the machine, which are stop button, start button and jog button. When the machine is in the stop state, press the jog button once, and the machine will jog, and the speed of rotation is determined by the L icon on the panel. Control, press the start button in the stop state, the machine runs. When the machine is running, press the stop button to stop the machine. F1, F2, F3, F4 on the panel are function keys, and their functions are different in different states. in working condition. F1 is the speed limit key, press 120 and then press F1, the machine does not exceed 120 rpm when running. F2 is chain stop, which means that the machine does not execute the steps of flat chain and pattern, but keeps running at the original step. F3 is the stop button at the end point, which means that the machine stops automatically after a sock ends. F4 has no effect. In addition, there are 26 English word lines and 10 numeric keys on the panel. for other operations. There are also three function buttons on the left, and the upper left is the editing or working state transition key. The middle left is the display brightness increase key, the next one is the display brightness reduction key, and the lower left is the backlight key. Change socks size: Press nS for the first size produced. Adjustment of socks tightness: Press R key, if you want to modify the value, press 9999E, then move the cursor, the value is from 0 to 199, the smaller the value, the tighter the socks, the larger the value, the looser the socks. Press the V key to turn back, press the W key, turn the page up, modify the elastic triangle into a circle, the operation is the same as above, modify the width of the elastic band, the same as above. Set the machine zero position: shake the first No. 1 needle to the triangle iron next to the pressing needle on the right side of the machine, press F4+S, press S, F1 to exit and save.
3. When the input and output operation is in the zero state of the machine, turn the key on the panel to the right in the early stage, and now press the state conversion key in the upper left corner, and the machine is turned into the programming state. In this state, the machine can input and output patterns and programs, as well as test machine parts, program, modify MTR, change the language of the machine and display squares and so on. Load the pattern from the floppy disk into the machine: Press L key to enter the disk management program, then press D key to read the floppy disk, use the arrow keys to move the cursor to the left directory, select the program or pattern name to be loaded and press L key, OK. Save the pattern from the machine to the floppy disk: Press L key to enter the disk management program, move the cursor to select the program or pattern to be saved, then press S key, if you want to change the name to save, press R key, OK. Transfer the program from the machine to the production state: press F4+C, move the cursor to select the name, and press the L key to confirm. Transfer the pattern from the machine to the production state: press F4+D, move the cursor to select the name, and press the L key to confirm. Delete redundant programs or patterns in the machine. When there are more than 100 programs or patterns in the machine, the machine cannot display the names of subsequent programs or patterns. Or more than the memory storage capacity of the machine, you need to delete redundant programs or patterns. Press L key, move the cursor to select the program or pattern name to be deleted, and press E key to confirm.
4. The operating procedures to keep the machine in good running condition require not only the careful and regular operation of the operator, but also the careful and timely maintenance of the saver.
5. Other operations to modify the machine MTR machine test editing program and pattern file fixed needle selection operation and other machine operations, please refer to the machine operation manual.
6. Explanation of several common faults (1) Upper stop: the uppermost yarn hook on the creel is off. (2) Stop in the middle section: the yarn sensing wire in the middle of the creel falls off. (3) Disc stop: the yarn sensing wire of the creel disc falls off. (4) Elastic yarn stop: The elastic yarn falls or breaks. (5) Stop the wire when picking the head: the head and the cotton yarn or spandex are too loose or broken. (6) The scissor plate stops: the yarn is wound around the scissors mouth. (7) Latch stop: the bottom thread is broken or other reasons cause the latch to turn up and stop. (8) Pin stop: the pin is broken